Netcomm Wireless Access Point NP720 Manual de usuario descargar pdf (Pagina 91)

Appendix C

Windows TCP/IP

Overview

Normally, no changes need to be made.

• By default, the Wireless Access Point will act as a DHCP client, automatically obtaining a

suitable IP Address (and related information) from your DHCP Server.

• If using Fixed (specified) IP addresses on your LAN (instead of a DHCP Server), there is

no need to change the TCP/IP of each PC. Just configure the Wireless Access Point to

match your existing LAN.

The following sections provide details about checking the TCP/IP settings for various types of

Windows, should that be necessary.

Checking TCP/IP Settings - Windows 9x/ME:

1. Select Control Panel - Network. You should see a screen like the following:

Figure 66: Network Configuration

2. Select the TCP/IP protocol for your network card.

3. Click on the Properties button. You should then see a screen like the following.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 117 118

Sin comentarios

Netcomm Wireless Access Point NP720 Manual de usuario Pagina 91