Netcomm Wireless Access Point NP720 Manual de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
Wireless Access Point User Guide
100
Figure 74: CLI Port Settings
4. Use the “Connect” command to start the connection.
5. You will be prompted for a user name and password.
Enter the current user name and password for the AP you are connecting to.
The default values are admin for the User Name, and password for the Password.
6. You will then see the prompt, and can then use any of the commands listed in the follow-
ing Command Reference.
Command Reference
The following commands are available.
? Display CLI Command List
admin Temporary factory admin
config wlan config wlanX
config profile config profile
del acl Delete Access Control List
del key Delete Encryption key
find bss Find BSS
find channel Find Available Channel
find all Find All BSS
format Format flash filesytem
bootrom Update boot rom image
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 117 118

Comentarios a estos manuales

Sin comentarios