Netcomm Wireless Access Point NP720 Manual de usuario descargar pdf (Pagina 83)

Wireless Access Point User Guide

SNMP

SNMP (Simple Network Management Protocol) is only useful if you have a SNMP program

on your PC. To reach this screen, select SNMP in the Management section of the menu.

Figure 63: SNMP Screen

Data - SNMP Screen

General

Enable SNMP

Use this to enable or disable SNMP as required

Community

Enter the community string, usually either "Public" or "Private".

Access Rights

Select the desired option:

• Read-only - Data can be read, but not changed.

• Read/Write - Data can be read, and setting changed.

Managers

Any Station

The IP address of the manager station is not checked.

Only this station

The IP address is checked, and must match the address you enter in

the IP address field provided.

If selected, you must enter the IP address of the required station.

Traps

Disable

Traps are not used.

Broadcast

Select this to have Traps broadcast on your network. This makes

them available to any PC.

Send to

Select this to have Trap messages sent to the specified PC only. If

selected, you must enter the IP Address of the desired PC.

Trap version

Select the desired option, as supported by your SNMP Management

program.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 117 118

Sin comentarios

Netcomm Wireless Access Point NP720 Manual de usuario Pagina 83