Netcomm NP5400 Manual de usuario descargar pdf (Pagina 20)

www.netcomm.com.au Rev. 1 - YML668

Page 20 NP5400 11g Wireless Access Point User Guide

The IP Address Tab

The IP Address Tab displays IP settings options on this AP.

IP Address Mode: Select "Static" or "DHCP" mode. For "Static" mode, the IP

address settings are given by user. For "DHCP" mode, these

settings will be overridden by a DHCP server on your

network. The default setting is "Static"

Default IP Address: The static IP address you want to assign to the AP. The

default value is "192.168.1.100".

Default subnet mask: The subnet mask you want to assign for the AP. The default

value is "255.255.255.0".

Default gateway: The internet gateway you want to assign for the AP. The

default value is "192.168.1.1".

Access point name: With the name, the AP can be found easily via Wireless

Nevigator Utility. It can be the nickname assigned by the

adminstrator.

Note: Click button "Save" to store the settings. The settings will work after AP

automatically reboots.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sin comentarios

Netcomm NP5400 Manual de usuario Pagina 20