Netcomm NTC-990 Manual de usuario descargar pdf (Pagina 28)

6.1.4 How to establish a Connection using the Cellular Router in PPPoE mode

This facility can be found on the LAN page.

To enable PPPoE mode:

Firstly ensure “Auto Connect” under the “Data Connection” configuration page is disabled.

Next open the “LAN” configuration page.

Specify the APN you wish to use to suit your carrier .

In addition you may specify an optional “Service Name” when a “Service Name” is specified the

connected device must use the same service name when connecting.

This facility is particularly useful if you have more than one PPPoE router or modem on a single Ethernet

network.

Finally click save to save your settings and enable PPPoE .

Note- Most people do not need to use PPPoE. If you do not know what PPPoE is, odds are you don’t need

this.

Revision 1.55 NetComm Limited

March 2009

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 71 72

Sin comentarios

Netcomm NTC-990 Manual de usuario Pagina 28